Make your own free website on Tripod.com

 


 

 

Heater Plate

Heater Plate is processed by stacking mica paper to required thickness and bonded with a high temperature resisting Silicone resin and set to plate form by applying hot press. The resin is fully cured to form dense and rigid sheets so that the sheets can be introduced to shearing, punching or stamping to any required size without peeling.

The product is heat proof & flame resistant with high mechanical strength excellent insulation properties under loaded high temperature. It does not emit either smoke or odor during heating.

They can be widely applied to reproduce winding boards for heating elements used in domestic appliances i.e. flatiron, bread toaster, kettle, hair dryer etc., Cover plates, High temperature spacers & washers.

Typical Properties

Description

HLM 501

HLP 501

HLF 501

Mica Paper

Muscovite

Phlogopite

Synthetic

Binder Resin

Silicone

Silicone

Silicone

Thickness

0.2~ 2.0mm

0.2~ 2.0mm

0.2~ 2.0mm

Thickness

Tolerance

Average

0.02

 0.02

 0.02

Individual

0.03~0.04

0.03~0.04

0.03~0.04

Density g/cm2

2.0~2.5

2.0~2.3

2.0~2.2

Mica Content % App.

86~90

86~90

86~90

Compressibility

at 200 C

Under 300 kgf/cm2

0.5~1.5 %

0.5~1.5 %

0.5~1.0 %

Elastic Compression %

1.0~1.5

1.0~1.5

1.0~1.2

Plastic Deformation %

0.6~1.2

0.6~1.2

0.6~1.0

Punchability

Clean Edge

Clean Edge

Clean Edge

Dielectric Strength  kv/mm

> 20

> 25

> 30

Temperature Endurance

550 C

850 C

1250 C

 

Declaimer Statement

Technical Data, Properties and specifications related to products described or mentioned are based on practical experience and should be used as guidelines only. We are not responsible for any loss or damage.

Send mail to tough@datainfosys.net with questions or comments about this web site.
Copyright 2001 Tough International (P) Ltd.
Last modified: 01/14/02