Make your own free website on Tripod.com

 


 

 

Insulating Tape

Micanite Tape is produced from Mica Splitting being laid-up and bonded to each other with a high temperature resisting resins on a desired reinforcement backing material i.e. glass cloth, PVC etc. either on one side or both sides. It is then set to sheet form by applying hot press. The used binder resin is controlled to maintain a stable and is fully cured state to form dense and flexible paper-like rolls and finally sliced to required width. Micanite Tape is supplied in Folium Rolls of 900/1000 mm width.

Micanite Tape possesses high degree of tensile strength, rigidity, flexibility, uniformity, pliability, toughness & cohesion. By adding reinforcement backing material, the tensile strength is increased considerably.

Major applications of the Micanite tapes are for insulation of cable, stator coil, armature coil, core iron, slot liner, copper conductor, rotor, motor, transformer layer, flange, cross- over, shafts etc and also suitable for phase separators and Fire resistant conduit wiring.

Typical Properties

Description

TSE 401

TSS 401

Mica Splitting

Muscovite

Muscovite

Binder Resin

Epoxy

Silicone

Thickness

0.12~0.16 mm

0.12~0.16 mm

Thickness

Tolerance

Average

 0.03

 0.03

Individual

0.03~0.05

0.03~0.05

Re-enforcement

Glass Cloth

Glass Cloth

Mica Content % App.

70 ~75

70 ~ 75

Tensile Strength N/cm

> 80

> 60

Dielectric Strength  kv/mm

> 20

> 20

 

Declaimer Statement

Technical Data, Properties and specifications related to products described or mentioned are based on practical experience and should be used as guidelines only. We are not responsible for any loss or damage.

Send mail to tough@datainfosys.net with questions or comments about this web site.
Copyright 2001 Tough International (P) Ltd.
Last modified: 01/14/02